High-Efficiency Large-Capacity Cleaning Tank
ISDENT ultrasonic dental cleaner equipped with a large-capacity wash tank, it can easily accommodate and handle large quantities of items, providing strong support for industrial-grade needs. The tank is combined with two sets of industrial ultrasonic generators to achieve powerful cleaning effect and ensure deep cleaning.
Intelligent Capacitive Sensor Control & Grouping Circuit Design
Dental ultrasonic cleaner adopts capacitance sensor control board, which is sensitive and convenient to operate and adapt to different cleaning tasks. Internal grouping drive circuit design, with multiple protection circuits and industrial-grade IC, to protect the stability and durability of the equipment, while through the moisture-proof treatment of the PCB board, to enhance the machine's ability to adapt to the environment.
Precise Temperature Control & Multi-Speed Heating
Built-in two sets of high-efficiency ceramic heaters for precise temperature control, so that the cleaning solution reaches the ideal temperature, accelerating the cleaning process, ensuring the rapid decomposition of stubborn stains and improving the cleaning effect.
Intelligent Display & Humanised Drainage Design
The three-colour LED display is clear and intuitive, showing the cleaning status in real time. Drainage device is located on the side of the device, which is convenient for quick drainage and daily cleaning and maintenance, prolonging the life of the machine.
High Strength Heat Dissipation & Solid Shell
Ultrasonic dental cleaning is built-in two sets of cooling fans, effectively distributing the heat generated by the machine operation, to ensure the stability of long-time work. The shell is made of durable engineering plastic material, anti-impact, anti-corrosion, adapt to a variety of working environments. In addition, the user can choose a variety of cleaning accessories according to the need to increase the flexibility and practicality of the cleaning machine.
Parameter:
| Cleaning tank volume |
6L |
| Cleaning tank size |
32.3*20.5*9.9cm |
| Maximum length of cleaning items |
34cm |
| Voltage and power |
260w (AC100-120V 50/60Hz)
300w (AC220-240V 50/60Hz)
250w (AC100 50/60Hz)
|
| Digital timing |
5min/10min/15min/20min/25min/30min |
| Drainage method |
drain valve |
| Ultrasonic frequency |
35000Hz |
| Cleaning tank material |
stainless steel SUS304 |
| Shell material |
ABS |
| Net weight |
7.5kg/16.5lb |
| Gross weight |
8.6kg/19lb |
| Product size |
51.5*30.5*24cm |
| Inner box size |
57.5*37*32.5cm |
| Packing quantity |
1pc/ctn |
| Outer box size |
60*38.5*34.5cm |
Accessories list:
| Indirect cleaning tank |
| Stainless steel bracket + stainless steel box |
| Beaker + beaker stand |
| Power plug cord |
| Soft water hose |
Features：
-
Large capacity cleaning tank
-
Capacitive induction control board
-
With drainage device
-
2 industrial ultrasonic generators
-
2 sets of ceramic heaters
-
3-color LED display
-
Group drive circuit design mode
-
Multiple protection circuits
-
Moisture-proof PCB board and industrial-grade IC
-
2 sets of cooling fans
-
Engineering plastic shell
Operation Guide:
1. Prepare for Cleaning
Open the lid, place items in the cleaning basket, then lower the basket into the tank. Add tap water until the level is between MIN and MAX, fully covering the items.
Important: Do not run the machine without water, as this can damage it.
2. Set Up Cleaning Time
Plug in and turn on the power. The LED will display the default time setting. To adjust, press the "Time" button and select from 5, 10, 15, 20, 25, or 30 minutes.
Note: Excessive cleaning time can cause damage to certain items, like loosening screws or damaging coatings.
3. Start Cleaning
Press the "On/Off" button. You’ll hear a buzzing sound, which quiets when you close the lid. The LED shows the countdown timer. When it reaches 00:00, cleaning is done. To pause, press "On/Off" again.
Note: If the red triangle symbol appears, the machine is overheated. Wait 20 minutes before using it again.
4. Use the Heating Option (if needed)
To heat the water, press the "Temp" button and select your desired temperature. Press "Heater" to start heating. Once the set temperature is reached, the heater will turn off automatically. The heater also shuts off after 50 minutes for safety.
5. After Cleaning
Turn off the power, open the lid, and remove the items. If draining is needed, attach the drain hose, open the drain valve, and empty the tank. Dry the tank and close the drain valve when finished.
Attention:
1. Always Add Water Before Turning On
Never turn on the machine without water, as running it dry for over 30 seconds can cause damage.
2. Protection Against Overheating
If there’s no water and the machine is accidentally turned on, it may overheat. A built-in temperature switch will automatically shut off the machine if the temperature rises too high, preventing damage. Power will usually reset in 6-10 minutes.
3. Limit Continuous Cleaning Time
For longer lifespan, avoid running the machine for more than 45 minutes straight. Let it cool down for about 20 minutes before starting again.
4. Drain Water After Each Use
After cleaning, drain all water and wipe the tank dry to avoid residue buildup.
5. Clean Exterior Carefully
Use a dry towel to clean the exterior; avoid using water directly on the machine’s surface.
6. Keep in a Cool Place
Store the machine in a cool, dry, and ventilated area away from direct sunlight.
