Function Integration: The ultrasonic periodontal therapy system combines the two functions of tooth cleaning and sand blasting into one, which is powerful and has a wide range of application scenarios.
Touch Screen Adjustment: The ultrasonic periodontal therapy system five functions can be converted, touch screen adjustment, fast and convenient.
Intelligent Identification Of Working Mode: The ultrasonic periodontal therapy system adopts microprocessor chip, supports intelligent control, automatic identification mode can recognize ultrasonic/sandblasting cleaning mode according to the selected working handle.
Two-Stage Sandblasting Handle Design: Ensure the separation of water and air, eliminating the cumbersome multi-part disassembly structure. Impermeable and moisture-proof, easy to maintain, long service life.
New Piping Structure: The new optimized piping structure of the ultrasonic periodontal therapy system reduces fluid pressure loss, and the five seal structure effectively removes plaque, pigment and calculus.
More Efficient Sandblasting: The anti-clogging sandblasting handpiece adopts a 0.7mm small diameter sandblasting nozzle, precision-built from German steel, to ensure reliability and durability, and prevent clogging and moisture intrusion.
Lightweight And Humanized: The combination of technology and art leads to a new field of air polishing. The ultrasonic periodontal therapy system weighs only 2.1 kg. The wireless footswitch makes it easy to operate.
Parameter:
|
Input voltage
|
230V~, 50/60Hz,0.3A
|
|
Supply voltage
|
25V~, 50Hz 1.3A
|
|
Input power
|
35VA
|
|
Wireless foot switch battery
|
AA batteries*2
|
|
Output half-excursion force
|
Minimum, 0.1N. deviation-50%
Maximum,5N. deviation+50%
|
|
Tip vibrating frequency
|
30kHz±5kHz
|
|
Tip output power
|
3W~20W
|
|
Intake Pressure
|
5 bar-6 bar (0.5MPa-0.6MPa)
|
|
Water temperature of powder spray system
|
0°C-45°C
|
|
Receiving Sensitivity
|
-114 dB(in accordance with China National Telecommunication Law)
|
|
Receiving frequency
|
2.4G-2.5G
|
|
Wireless foot switch
|
transmission frequency: 2.412GHz-2.462GHz
modulation type: GFSK
|
|
Max Radiation power
|
12dbm
|
Installation:
1. Open the package, check whether all items of the device are complete according to the packing list, and place the main unit on a stable plane facing the operator.
2. Insert the external air pipe (black) connector into the air intake connector on the back
of the main unit: press the snap ring first and then insert the air inlet connector. Insert the powder tank into the position of powder tank above the main unit.
3. Fill a proper amount of water into the transparent water bottle, and insert the water bottle
into the sink seat above the main unit.
4. Insert the wired foot switch plug into the wired foot switch socket.
5. Insert the ultrasonic handpiece and air polishing handpiece into the corresponding handpiece
tail wire, and place the ultrasonic handpiece on the left bracket of the main unit, and place
the air polishing handpiece on the right bracket.
6. Turn off the power switch on the main unit, then insert the output plug of the power adapter
into the DC power supply socket on the back of the main unit, and insert the input plug of the
power adapter into the～220V network power supply.
Troubleshooting:
|
Fault
|
Possible cause
|
Solutions
|
|
The device can not run
|
The power cord is not plugged in
|
Check the power plug
|
|
The fuse in the power supply is broken
|
Replace the fuse (Replace the T1AL 250 V under the guidance of the manufacturer's designated person)
|
|
The battery of foot switch battery is drained
|
Replace the battery
|
|
The foot switch fails
|
Refer to the wireless foot switch code pairing method to re-code the code
|
|
Poor connection of foot switch(wired)
|
Plug in the foot switch
|
|
No ultrasonic
vibration
|
The tip hasn't been screwed on to the handpiece tightly
|
Screw the tip on the handpiece tightly by wrench
|
|
The tail wire is loose from the board connector
|
Contact local dealer or our company
|
|
Handpiece failure
|
Pull out handpiece and contact us or anthorized dealers
|
|
Tail wire failure
|
Contact local dealer
or our company
|
|
The tip vibrates but
does not atomize
|
The amount of water
volume is too little
|
Adjust the water volume
to a higher grade
|
|
The power is too little
|
Turn up the power
|
|
The handpiece still
comes out of water
after the power is
turned off
|
Electromagnetic valve failure
|
Contact local dealer
or our company
|
|
Heating handpiece
|
The amount of water
volume is too little
|
Adjust the water volume
to a higher grade
|
|
Heating handpiece
seriously
|
Handpiece failure
|
Pull out handpiece and contact local dealer or our company
|
|
The amount of water
volume is too little
|
The amount of water
volume is too little
|
Adjust the water volume
to a higher grade
|
|
Waterways are blocked
|
Unblock waterways with
three-purpose guns
|
|
The tip vibrates
weakly
|
The tip is loose
|
Screw the tip tightly
|
|
The connection between The handpiece and the tail wire socket is not dry
|
Dry the connection between the handpiece and the tail wire with hot air
|
|
Excessive wear of the tip
|
Replace the tip
|
|
Water seeps from the
connection between
the handpiece and the
tail wire socket
|
The waterproof
O-ring is damaged
|
Replace the waterproof O-ring
|
|
File can not vibrate
|
Loose Clamping nut is loose
|
Screw the nut tightly
|
|
The root canal clamp
holder is damaged
|
Replace the root
canal clamp holder
|
|
Leakage ofliquids/
gases under
the device
|
The inner tube is broken
|
Contact local dealer
or our company
|
|
Air polishing without
powder, air or water
|
No air or water
|
Contact local dealer
or our company
|
|
The handpiece or
nozzle is clogged
|
Pull out the handpiece and check the sandblasting tail wire for air or sand spray. If sand powder, air and water can be sprayed, please use a steel wire to unclog the handpiece and put it in a washing machine for cleaning.
|
|
No powder and water,
but air spray
|
No powder
|
Check if there is too much or toolittle powder in the powder tank
|
|
No water
|
Check if there is water in
the water bottle
|
|
The powder is damp
|
Empty and dry the powder tank, then refill it with dry powder
|
