High-Efficiency Transducer Technology & Excellent Cleaning Effect
Ultrasonic cleaner dental is equipped with high-performance high-quality transducer, and advanced bonding process to enhance the electro-acoustic conversion efficiency, to ensure strong and stable ultrasonic output power. Powerful ultrasonic output makes stubborn stains and hard to reach tiny crevices can also be thoroughly cleaned to achieve excellent cleaning results.
High Quality Durable Inner Tank
The ultrasonic cleaner dental inner tank is made of high quality SUS304 stainless steel, which has strong corrosion resistance and ensures that it remains clean and stable in long-term use. The high durability of the material makes the service life of the machine significantly longer, reducing the frequency of maintenance and replacement, economical and practical.
Adjustable Constant Temperature Heating Function
The model with heating function is equipped with automatic heating thermostat, the temperature range is adjustable from room temperature to 80°C, providing flexible options for different cleaning needs. The thermostatic heating system not only speeds up the cleaning process, but also further enhances the cleaning effect, which is especially suitable for removing grease stains, residues and other difficult stains.
Parameter:
| Capacity |
6.5L |
| Transducer |
3PCS |
| Input voltage |
AC220-240V 50Hz |
| Ultrasonic power |
180W |
| Heating power |
300W |
| Ultrasonic frequency |
40KHz |
| Inner tank size |
300*150*150mm |
| Machine size |
375*182*274mm |
Usage:
1. Plug in the power supply, check whether the display is normal, to confirm that the machine has been powered on, the power indicator light or display panel display is lit.
2. The machine tank to join the cleaning fluid, the cleaning basket containing items into the machine tank (glasses cleaning can be put on the basket without ).
3. Set the cleaning time (default is 5 minutes), press start.
4. If you use heating, set the temperature and press the temperature switch to turn on the heating (008 series and mechanical timer series without heating system).
Heating whether to start instructions:
①mechanical knob control series if the heating function is turned on the heating indicator will light up;
②digital series to open the heating function of the ‘actual temperature’ display in the number will be flashing. Conversely, the heating function is not turned on. [Open heating next to the heating indicator will light up, heating indicator light does not indicate that the temperature has been reached, the heating system in the heat preservation pause state.
5. After cleaning, turn off the power and unplug the machine power cord, dispose of the machine tank cleaning fluid, wipe the machine put away.
Precautions:
1. Before connecting to the power supply, please make sure the voltage is within the rated range.
2. Before using, make sure the earth wire is reliably connected to prevent static electricity.
3. Please place the items on the cleaning basket before putting them into the tank for cleaning (glasses cleaning can be done without putting on the basket)
4. It is recommended to give priority to the use of environmentally friendly water-soluble cleaning agents, the use of strong acidic or alkaline cleaning agents is strictly prohibited.
5. It is recommended to pause for a period of time (usually more than 3 minutes) after the machine has worked for an hour before starting the work.
6. Please do not use the machine in too high or too low temperature environment.
7. Please do not use the machine in the environment of strong vibration or shock.
8. Do not use the machine in the environment where there is corrosive gas or dust.
9. Do not use the machine in an environment where water, oil, or chemicals are splashed.
10. Please do not use the machine in the environment of flammable and explosive gases.
11. When there is no cleaning liquid in the cleaning tank, it is forbidden to start the machine.
12. Start the heating function, the cleaning tank liquid shall not be less than 2/3 of the height of the cleaning tank tank, do not start the heating function, the cleaning tank liquid shall not be less than 1/2 of the height of the cleaning tank tank.
13. In the use of flammable, volatile liquids (such as alcohol, washing water) cleaning, prohibit the start of the heating function, ultrasonic cleaning machine and cleaning agent used together, the cleaning effect is better.
Common Troubleshooting Methods:
|
Problem
|
Possible Cause
|
Treatment Measure
|
|
Ultrasonic not working
|
1. The power supply is not connected
2. Fuse is burnt out
3. The high-frequency cable is improperly connected or short-circuited
4. The transducer line is faulty
5. The circuit board is burned out
Other reasons
|
1. Check and plug in the power supply
2. Confirm that the power supply voltage is appropriate and replace the fuse with the same specification
3. Find out which component is burned out, replace the device or directly change the version
4. For other reasons, please consult online
|
|
Poor cleaning effect
|
1. The liquid level in the inner tank is too high or too low
2. Use an inappropriate cleaning solution
3. Other reasons
|
1. Adjust the liquid level to the best height
2. Stop working, turn off the power, and replace the correct cleaning solution
3. Online consultation
|
|
Electrostatically charged
|
1. The circuit is not grounded
2. The ground cable inside the device is not connected
|
1. Ensure that the ground cable is securely connected
2. Check whether the ground cable of the device is loose and connected properly
|
|
Other problems
|
|
Online consulting vendor
|
